Справочник Пользователя для Sound Performance Lab 2269

This connector allows you to connect a microphone and route it to eight 
external devices. One possible application would be easy comparison of up 
to eight mic preamps or other external processors with a single microphone. 
A condenser microphone may be used, although switching noises may occur 
due to phantom power. In this case, we recommend that you reduce the output 
volume before switching.

This switch allows you to easily select between two connected sources. With 
the switch depressed (LED illuminates), the microphone input signal is routed 
to the outputs.

NOTE: The microphone signal is only routed to the left channels; right chan-

nels will still carry the line signal (if present). Always use the left channel 
(odd adapter cable numbers) when connecting to the inputs of various mic 
preamps or other external processors. The external equipment‘s outputs may 
be connected to either left or right channels. The MONO switch on the Router 
should be activated so that the microphone signal is heard on both channels.

These switches route the input signal to the corresponding sends, e.g. external 
devices. A switch must be activated in order for the corresponding device to 
receive the signal.

This switch allows you to increase the Router‘s input level by 10 dB. This is 
often necessary when using commercial CD players or similar devices with low 
output levels in conjunction with professional audio equipment. 

This pot controls the output level at the STEREO OUTPUTS. If for example 
active speakers are connected to these outputs, the volume can be controlled 
via the LINE OUT pot.

This switch routes the return signal 1:1 to the STEREO OUTPUTS, bypassing 
the LINE OUT level control. The Router should always be in FIXED mode when 
used to switch between various insert devices.