Справочник Пользователя для Sound Performance Lab GOLDMIKE MK2 2485

IMPORTANT:  Before you operate your GoldMike MK2, first 
check carefully whether the local voltage setting corresponds 
to the switch setting  on the rear panel! 

If not, and the voltage is in one way or another, incorrect, you 
will either experience an immediate fuse burn through (if the 
setting is lower than the supplied power) or, if the power is 
110-120 V at a 220-240 V input switch setting, the GoldMike MK2   
will simply not function correctly.

Moreover, make sure you remove the power plug from your 
GoldMike MK2 before changing this switch setting!

Always  turn  volume  down  or  mute  your  speakers  when 
connecting or repatching audio cables to avoid damage to your 
speakers and ears.

It makes good sense to think about where you place your MTC 
before connecting it. It should be positioned so that you can 
easily reach it, but there are other considerations. Try not to 
place it near heat sources or in direct sunlight, and avoid expo-
sure to excessive vibrations, dust, heat, cold or moisture. It 
should also be kept away from transformers, motors, power 
amplifiers and digital processors. In addition, please:

• Do not open the case. You may risk very dangerous electric 

shock and damage to your equipment.

• Leave repairs and maintenance to a qualified service techni-

cian. Should foreign objects fall inside the case, contact your 
authorized dealer or support person.

• To avoid electric shock or fire hazards, do not expose your unit 

to rain or moisture.

• In case of lightning, unplug the unit. Always unplug the cable 

by pulling on the plug only; never pull on the cable.

• Never force a switch or knob.

• Use a soft, lint-free cloth to clean the case, if necessary 

together with an acid-free cleaning oil. Avoid any cleaning 
agents as they may damage the surfaces of the unit.