Справочник Пользователя для SonicWALL E6500

Page 48

  Enabling Security Services in SonicOS  

Enabling Security Services in SonicOS

You must enable each security service individually in the 
SonicOS user interface. See the following procedures to enable 
and configure the following three basic security services:

Gateway Anti-Virus

Intrusion Prevention

Anti-Spyware

For more information on configuring your security services, 
refer to the SonicOS Administrator’s Guide.

Applying Security Services to Zones

A network zone is a logical group of one or more interfaces to 
which you can apply security rules to regulate traffic passing 
from one zone to another zone. 

Security services such as Gateway Anti-Virus are automatically 
applied to the LAN and WAN network zones when you activate 
the license and enable the service. To protect other zones such 
as the DMZ or Wireless LAN (WLAN), you must apply the 
security services to the network zones. For example, you can 
configure SonicWALL Intrusion Prevention Service for incoming 
and outgoing traffic on the WLAN zone to add more security for 
internal network traffic.

To apply services to network zones:
1.

Navigate to the Network > Zones page.

2.

In the Zone Settings table, click the Configure icon for the 

zone where you want to apply security services.

3.

In the Edit Zone dialog box on the General tab, select the 

checkboxes for the security services to enable on this 

zone.

4.

On the Edit Zone page, select the checkboxes for the 

security services that you want to enable. 

5.

Click OK.

6.

To enable security services on other zones, repeat steps 2 

through 4 for each zone.

NSA_E6500_GSG.book  Page 48  Wednesday, June 17, 2009  7:16 PM