Справочник Пользователя для SMC Networks WI-FI PHONE FOR SKYPETM WSKP100
Installing the Battery
2-2
Charging the Battery
1.
Connect the AC Power Charger — Lift up the rubber cover on the mini USB
charger port and connect the power charger to the port. Then, plug the
charger into an AC electrical outlet.
charger port and connect the power charger to the port. Then, plug the
charger into an AC electrical outlet.
Note: The power charger automatically adjusts to any voltage between 100-240 volts
at 50 or 60 Hz.
2.
Fully Charge Battery — For the first time use, allow eight hours to fully
charge the battery before turning on the phone.
charge the battery before turning on the phone.
3.
Disconnect the Power Charger — When the battery is fully charged, remove
the power charger from the phone and push down the charger port’s rubber
cover.
the power charger from the phone and push down the charger port’s rubber
cover.
Note: When you next have to charge the phone’s battery, you do not have to power
off the phone. Just connect the charger as described above and wait until the
LCD display indicates the battery is fully charged. After the first charge, the
charge time is about three hours.
LCD display indicates the battery is fully charged. After the first charge, the
charge time is about three hours.
Lift Cover
Connect
Charger
Charger