Справочник Пользователя для Smartdisk Firewire CD-R/W
14
SmartDisk FireWire CD-R/W User Guide
Introduction
Once the CD Writing Software is installed as described in Chapter 2, you can connect
SmartDisk FireWire CD-R/W to record and play back CDs. This Chapter describes
how to connect and disconnect the drive on a Macintosh and PC.
SmartDisk FireWire CD-R/W to record and play back CDs. This Chapter describes
how to connect and disconnect the drive on a Macintosh and PC.
FireWire or IEEE 1394 external drives are "hot-pluggable"; this means you do not
have to turn off your computer to connect or disconnect your drive.
have to turn off your computer to connect or disconnect your drive.
How Power is Supplied to your CD-RW Drive
Your SmartDisk FireWire CD-R/W is automatically turned on when you connect it to
your computer and turned off when it is disconnected. It does not have an On/Off
switch. No external power source is required because the FireWire connection
supplies the power. However, external power - an AC Adapter - is required if:
your computer and turned off when it is disconnected. It does not have an On/Off
switch. No external power source is required because the FireWire connection
supplies the power. However, external power - an AC Adapter - is required if:
•
You are connecting the SmartDisk FireWire CD-R/W to an unpowered
FireWire port (for example, CardBus cards).
FireWire port (for example, CardBus cards).
•
You are creating a daisy chain of more than two bus-powered FireWire
devices on a single FireWire port.
devices on a single FireWire port.
For information on how to purchase an AC Adapter, see “Optional Accessories” on
page 10.
page 10.
Figure 2
SmartDisk FireWire CD-R/W - Back
Connecting SmartDisk FireWire CD-R/W
3
FireWire Ports
AC Adapter Input