Справочник Пользователя для SmartBridges sB3021

 

 

 

Page 105 of 113 

 

i n t e l l i g e n t     w i r e l e s s     p l a t f o r m

 

airHaul

2

 Nexus PRO™ User Guide

 

 
Antenna 

 
Frequency support 

•  5GHz antennas will work between 5.2 and 5.8 GHz. 

•  2.4 GHz band antennas will work between 2.4 GHz to 2.485 GHz 

Gain 

•  5 Ghz band antenna gain is 23 dBi. 

•  2.4 Ghz band antenna gain is 24 dBi  

•  29 dBi gain antenna is also available in request 

 
Beam width  

•  -3 dB Beam Width 10º -5GHz band antenna 

•  -3 dB Beam Width 8º - 2.4 GHZ band antenna 

Polarization: 

•  Polarization -Linear Horizontal or Vertical 

•  Factory assembled sB antennas are vertically polarized.   

•  Polarity can be changed from vertical to a horizontal polarity by rotating the dish.  

 

 

 
Different Modes of Operation  

• Repeater 

mode 

- Root Bridge & Remote Bridge/Router/NAT Mode.  

•  Link Aggregate mode 

- Root Router 
- Remote Router/NAT Mode 

Bridge mode 

•  Device will act as a transparent bridge and will operate in Mac layer. 
•  Bridge mode association is based on channel and MAC authorization only. ESSID will not 

be used for the setting up a link. 

•  If the remote client is configured in a bridge mode and channel needs to be changed then 

channel needs to be changed at both the radios. 

Router mode  

•  Device will operate in layer 3 to perform routing. It is pure routing and network provider 

has to take care of proper routing as there is no NAT feature in airHaul

2

 Nexus PRO. 

•  In a Router mode, the association is based on SSID. 

•  Remote device configured in a Router mode will automatically follow the Root Bridge for 

any change in channel. For this reason, the Remote Router/NAT mode is preferred. 
Please select a channel with low interference for setting up a link in the beginning. 

 
NAT mode 

•  This mode allows a Local Area Network (LAN) to use one set of IP addresses for internal 

traffic and a single wireless IP for external traffic. It provides a type of firewall by hiding 
internal IP addresses and allows sharing by many computers behind the aCNPT. Since 
these are done in the LAN there is no possibility of conflict with IP addresses in the public 
or wireless network.