Справочник Пользователя для SMART Technologies Document Camera 280

16

99-00864-20 D0

You can adjust the angle of the camera column and column head to capture a three 
dimensional object from the side.

1.

Set up the document camera and connect it to your computer (see page 7).

2.

Adjust the angle of the camera column and camera head as shown in the previous figure.

NOTE: Position the object so that it is at least 50 mm away from the camera head. If you 
position it closer, the camera is unable to focus.

3.

Rotate the zoom dial on the camera until the object image is at the desired magnification.

OR

In SMART Notebook, press the plus or minus buttons to the right of the magnification 

icon 

 until the object image is at the desired magnification.

4.

Press the AF button on the document camera to focus the image.

OR

In SMART Notebook, press the AF button in the SMART Document Camera window to 
focus the image. You can also fine tune the focus with the plus or minus buttons to the 

right of the focus icon 

.

5.

Press the brightness buttons 

   on the document camera control panel to adjust the 

image brightness.

OR

In SMART Notebook, press the plus or minus buttons to the right of the brightness icon 

 

to adjust the brightness.

Adjust

Adjust

Adjust