Справочник Пользователя для Sioux Tools TURBO-MAX 6056

Page 14

It is extremely important that the following lubrication schedule be followed: Bearings: use a good

quality multipurpose grease. Replace all damaged or missing grease zerks immediately. Always clean zerks

before using grease gun. Pump the grease in slowly until a slight bead forms around the bearing seals. Once

a month check lines and connections on grease banks for leaks.

Oilbath Oil: Use a good high quality universal oil. Use an oil that meets or exceeds hydraulic oil grade. Fill

to the top lower oilbath roller chains. Change yearly or whenever contaminated.

before operating a new mixer, the roller chains should be liberally lubricated and then the unit operated un-

der a no-load condition. This break-in period will allow the roller chains to be thoroughly lubricated and thus

minimize heat-up during operation.