Справочник Пользователя для Simaudio 750 D

D  Digital-to-Analog Converter / CD Transport 

 

Introduction 

 

Your MOON 750D DAC / CD Transport incorporates many innovative significant design features to achieve its “world class” 
level of performance.  This is an abbreviated list of the more important features: 
 

ESS Technology SABRE

 Reference DAC/Digital Filter (ES9018S)  working in 32-bit Hyperstream™ to achieve 

unprecedented jitter immunity and low-level linearity via a patented Time Domain Jitter Eliminator. 

 

Digital Audio Signal Processing using M-AJiC32 (MOON Asynchronous Jitter Control in 32-bit mode)  

 

Proprietary  CD drive system mounted on our M-Quattro gel-based 4-point floating suspension for vibration damping, 
allowing ambient and spatial cues in your recordings to come to life like never before   

 

Full unsolicited RS-232 bidirectional feedback. 

 

Four (4) digital inputs (AES/EBU, S/PDIF, TosLink and USB) allowing for a connection to virtually any digital source 

 

Two (2) digital outputs – AES/EBU and S/PDIF 

 

Separate digital and analog power supplies, each with their own toroidal transformer 

 

A virtually jitter-free

digital clocking system. 

 

Power supply voltage regulation includes i

DCf (Independent Inductive DC Filtering); 1 inductor for each and every chip 

(i.e. OpAmp, DAC, Digital Filter, etc.) in the audio circuit’s signal path – 24 stages in all. 

 

Optional external power supply available in the near future. 

 

Four-layer pure copper circuit PCB tracings; The advantages include better ground and power supply circuit layouts 
resulting in a much shorter signal path and dramatically improved signal-to-noise ratio. 

 

Extremely rigid chassis construction to minimize the effects of external vibrations. 

 

Accurate matching of the very finest quality electronic components in a symmetrical circuit design. 

 

Designed to be powered up at all times for optimal performance. 

 

Low operating temperature for a longer than normal life expectancy. 

 

Installation & Placement 

 

The MOON 750D Reference DAC / CD Transport is very heavy. It requires reasonable ventilation to maintain an optimum 
and consistent operating temperature.  Consequently, it should be placed in a location with empty space around it for proper 
heat dissipation. As well, it should be placed on a solid level surface. You should avoid placing it near a heat source or inside a 
closed cabinet that is not well ventilated as this could compromise the DAC / CD Transport’s performance and reliability.

 

 

Once you’ve decided on a location for the 750D, you should install the four (4) pointed screw-on cones into the threaded 
holes located on the bottom of the four (4) the corner posts of the DAC / CD Transport chassis. 

These cones can potentially 

scratch some surface, therefore it’s advisable to follow these instructions: 

 Place your 750D on a soft surface (i.e. carpet) and 

carefully turn it so that it rests on its side. Screw one cone onto each of the four posts.  Carefully move the chassis to it’s pre-
determined location.   

 

In the event that the surface you have chosen isn’t perfectly level, each of the four (4) cones on your 750D  are height 
adjustable; carefully using your fingers, you can either raise each leg by turning the cone underneath clockwise, or lower each 
leg by turning it counterclockwise. 

 

____________________________________________________________________________________ 

 

Introduction  

 

 

 

 

 

 

 

 

                        6