Справочник Пользователя для Sierra Primary Gas Flow Calibrator SL-800

39 

 

 

 

Most software problems encountered will fall into one of two areas: 

 

The Cal=Trak Communications program might be configured for a serial port that you are not connected to. Most modern computers have 

only one serial port, but many older computers have two 9-pin serial ports. If your computer has two 9-pin ports and you are experiencing 

difficulty with installation, please switch your serial cable to the other port and test again.  If your computer has no serial ports, you may use 

USB ports with corresponding USB/serial adapters.   

 

Serial Port Configuration Issue 

You might have the correct physical port selected on the computer, but the wrong port selected in the Cal=Trak Communications Program. 

Remember that the default serial port selection is COM1. If you are using a port other than COM1, you will need to use the procedure listed 

in Section 3.0, Changing the COM port. If you have additional problems using the Cal=Trak Communications Program please see Section 

6.0, Contacting Support.