Справочник Пользователя для Sierra Wireless RAVEN 1X 20070914
Raven 1x
111
20070914
•
n=0 : Disable
•
n=3 : Data for one call.
•
n=4 : Data for all calls (default).
*CTSE=n
Clear To Send Enable: This feature asserts CTS when there is a
network connection.
network connection.
•
n=0 : Disabled (Default).
•
n=1 : Enable assertion of CTS when there is network
coverage.
coverage.
RS232 voltage levels:
Positive = Network coverage.
Negative = No coverage.
Negative = No coverage.
Tip: Flow control (AT\Q) will override this indication, so if you want to
use CTS to indicate network coverage, flow control has to be off
(AT\Q0).
use CTS to indicate network coverage, flow control has to be off
(AT\Q0).
*MODEMHISPEED
Set the internal serial link speed to the internal (radio) module.
•
n=0 : 115200 (default)
•
n=1 : 230400
*NUMTOIP=n
Convert 12 digit number to IP.
•
n=0 : Use as name.
•
n=1 : Use as IP address.
*PPPNOCARRIER=n
Provides a “No Carrier” message to a device connected to the
serial port using PPP or CHAP when the cellular connection
becomes unavailable.
serial port using PPP or CHAP when the cellular connection
becomes unavailable.
•
n=0 : Disabled (Default).
•
n=1 : Enabled.
TCP
This group includes commands specific to TCP serial commu‐
nications.
nications.