Справочник Пользователя для Sierra Wireless RAVEN 1X 20070914
Raven 1x
137
20070914
update the MDN. Changes will automatically update the
Access Overload Class values unless specifically modified
using +WAOC command.
Access Overload Class values unless specifically modified
using +WAOC command.
+WSID=[idx],[SID],[NID]
Set SID and NID. C3x11 and C3x11E only.
•
idx=The location in the SID/NID list to store the values.
•
sid=system ID
•
nid=network ID
The new SID/NID values are committed to NV with the
+WCMT command (AT+WCMT=1). A maximum of 20 index
locations (0‐19) are supported. Error 22 is returned if the
specified index value is not in the valid range.
+WCMT command (AT+WCMT=1). A maximum of 20 index
locations (0‐19) are supported. Error 22 is returned if the
specified index value is not in the valid range.
~NAMVAL=nam[,min,msid,sid,nid]
Tip: It is recommended to use the Setup Wizard for your carrier to
provision the modem.
provision the modem.
Write account activation data. C3x10 and C3x10E only.
Following writing the values, the modem must be reset.
Following writing the values, the modem must be reset.
•
nam=0
•
min=phone number
•
msid=second number
•
sid=0 or the system ID
•
nid=63355 or the network ID
Note: If ~NAMLCK has not been successfully executed, the modem
returns ERROR.
returns ERROR.
•
nam=0
•
min=phone number
•
msid=second number
•
sid=0 or the system ID
•
nid=63355 or the network ID