Справочник Пользователя для Sharpvision XV-Z7000U

This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.

ⳭFront

ⳭRear

Normal image

Inverted image

Reversed image

Reversed and inverted image

1 Press MENU.

2 Press ∂/ƒ  to select “PRJ Mode”, and then press

ENTER.

3 Press ∂/ƒ to select the desired projection mode,

and then press ENTER.

4 To exit from the GUI, press MENU.

• This function is used for the reversed image and ceiling-

mount setups. See page 18 for these setups.

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, since the projector cannot distinguish
640

⳯480 signal resolution on computers or 480P on

DTVs, select an appropriate mode on “Special Modes.”

1 Press MENU.

2 Press ∂/ƒ to select “Special Modes”, and then

press ENTER.

3 Press ∂/ƒ to select the optimal resolution mode.

4 Press ENTER to save the setting.

5 To exit from the GUI, press MENU.