Справочник Пользователя для Servis Washer/Dryer WASHER DRYER

T: 0800 0124 382

USAGE

Anti-Allergic Function: This additional rinse operation will carry out all rinsing steps

in hot water. We recommend using this on laundry worn on delicate skin such as baby

clothes.

To activate this function, press the

button until the

symbol appears on the screen.

Easy Ironing Function: Using this function will result in your laundry being less

crinkled at the end of the selected programme.

To activate this function, press the

button.

Economic Time Interval Function: Before activating this function please

ensure that you have carried out the Eco Time Setting as described on page 23.

Press

the

button to activate the Eco Time function. The

symbol will be

displayed on the information screen.

The

will be displayed on the information screen until Eco Time is switched off. To

switch off Eco Time, press the

button.

If you wish to run the selected programme while the Eco Time function is active, press

the

button. The start of the programme will be delayed until the start of the Eco

Time interval. The programme start time and duration will be displayed alternately on the

information screen.

If you do not wish to run the selected programme between the Eco Time hours, press

the

button again. ‘eco time is cancelled’ will be displayed on the information screen.

Your Washer Dryer will return to the main programme screen in 3 seconds. To start the

programme, press the

button.

Delay Time/Finish Time Function: This allows you to either delay the start time

of the selected programme or specify the finish time of the programme.

Please ensure that the current time is correctly set before using this function.

Press

the button to access this function.

The current time will be shown on the information screen for 3 seconds before the delay

time/finish time screen is displayed (fig 21).

You can increase or decrease the delay or finish time in 10 minute intervals by using the

or buttons.

Press

the button to set the delay and finish times.

Please Note: If you change the delay time, the finish time will automatically be updated.

Alternatively, if you change the finish time, the delay time will automatically be updated.

Figure 21