Справочник Пользователя для SeaLand 1 2500 Series

3

1.  The riser section of the docking platform is 

mounted on a level floor using four screws (not 

supplied).  The floor must be strong enough 

to support the weight of the cassette when full 

(about 40 lbs. – 18 kg).

1.  The base section of the docking platform is at-

tached to the riser. The base has two tabs (A) 

that must be pushed into the respective slots 

in the rear wall of the riser. Make sure that the 

connection (B) for the carbon filter fits into the 

space provided.

2.  The ventilation hose (C) is routed out the side of 

the base. Using barbed hose adapter provided, 

route reinforced 5/8-inch (16mm) vent hose (not 

supplied) to an outside vent fitting.

3.  Fasten the base of the docking platform to the 

surface (D).

A

A

B

D

both ends.

1.  Cassette vacuum tank must be 

used with VacuFlush toilet.

2.  VacuFlush toilet must be  

connected to pressurized  

water supply (not shown).

3.  Centerline of toilet base must 

be 11 inches (279 mm) from 

back wall.

4.  5/8-inch (16mm) ID vent hose 

must be attached to vent fitting 

(not included).

C