Справочник Пользователя для Saeco Coffee Makers ESPRESSO SG200E
24
English
fig.36
fig.37
7 - PAYMENT SYSTEM
INSTALLATION
7.1
Payment system installation
on the machine
The vending machine has no payment system.
The responsibility for possible damages to the
machine and other objects and for personal
injuries caused by an incorrect installation of the
payment system falls on the person who installed
the system.
- remove the cup dispenser
- from the internal side of the door, cut the
external film following the punched shape
which corresponds to the desired cashless
payment or coin validation system (fig. 36)
- cut away plastic door joints by means of an
hacksaw (fig.37)
- after finishing the whole perimeter, install and
secure the payment system
- connect the payment system to the CPU card
- reassemble the cup dispenser
NOTE: a special interface card is required for
connecting 12 Vcd coins validation systems to
the CPU card.
- Then enter programming so as to choose
convenient settings.
See section 8 PROGRAMMING AND
MAINTENANCE MENU in order to check
parameter setting, which should be in line with
the system used.