Справочник Пользователя для Russound ST2

15

The tuner is power managed by the CAV6.6 or other
RNET-enabled controller. If the tuner is in standby
mode, any button press of the UNO-S2 keypad will
bring the tuner out of standby mode.    

On the UNO-S2 keypad, press 

to select either

Tuner 1 or Tuner 2 by choosing the tuner’s 

preassigned source number.

Push 

to toggle between AM band and FM band

reception.

Use

and 

for manual tuning. The frequen-

cy will appear on the keypad and the active tuner. To

move quickly through the channels, press and hold

either 

or 

for more than 1.5 seconds.

A press on

will seek the next higher tuneable

station. If a tuneable station is not found, end the

SEEK function by pressing 

again.

To scan, press and hold then release 

. The

tuner scans through tuned stations with a 5-second

preview before moving to the next station. To end

scanning, press 

again.

To select a bank, press and hold 

for bank up or

for bank down. The bank’s

name will be temporarily displayed on the UNO-S2.  

Press

and 

to scroll through the memory

presets for the selected bank. This procedure will

step through all of the presets in the current bank,

then loop back to start at the first one. Only config-

ured presets will be displayed.

Press 

to mute/unmute the tuner audio output.