Справочник Пользователя для Roberts Radio SOUND66

1. Press 

the 

On / Standby button to switch on your sound system. 

 When 

fi rst switched on, the sound system will be in DAB mode. After 

each use the sound system will remember the mode used and then 
switch on in that mode the next time that it is used.

2.  If the sound system has been used before, the last used station will 

be selected.

 
3.  If this is the fi rst time that the sound system has been used a quick 

scan of the Band III DAB channels will be carried out. The fi rst station 
in the list of stations found during scanning will be played. The display 
will show the station name.

4.  During the scanning process the display will show progress of the 

station search for example ">>>> 18". The number on the right of the  
display is the number of stations that have been found. When the scan 
is completed the fi rst station (in numeric-alpha order 0....9, A....Z  will 
be selected.

5.  If no signals are found then "OFF AIR" will be displayed and it may be 

necessary to relocate your sound system to a position giving better 
reception. You should then carry out a scan to fi nd stations as described 
on page 11.

• 

Your sound system has a indicator 

 on the display to indicate the 

strength of the DAB radio signal being received.

Note: When fi rst switched on, the radio will set the volume to a moderately 
high level, in case the broadcast is very quiet. After you have set the 
volume using the Volume Up or Down buttons, the radio will remember 
the setting that you have applied for the next time that it is used.

1