Справочник Пользователя для Ricoh feeder

When the Machine Does Not Operate As wanted

4

The following table explains the meaning of the various beep patterns that the ma-
chine produces to alert users about left originals and other machine conditions.

❒ Users cannot mute the machine's beep alerts. When the machine beeps to alert

users of a paper jam or toner request, if the machine's covers are opened and
closed repeatedly within a short space of time, the beep alert might continue,
even after normal status has resumed.

For details about enabling or disabling beep alerts, see “The System Settings”,
General Settings Guide.

Two long beeps.

Machine has warmed up. After cooling or being switched on, the 

machine has fully warmed up and is 
ready for use.

Single short beep.

Panel/screen input ac-
cepted.

A control panel or screen key was 
pressed. Single short beeps are pro-
duced only when valid keys are 
pressed.

Single long beep.

Job completed.

A Copier/Document Server Features 
job has finished.

Four long beeps.

Soft alert.

The screen changes back to the initial 
screen after the machine shifts to en-
ergy-saving mode, or the setting was 
reset at the simplified display.

Four long beeps repeated 
five times.

Soft alert.

An original has been left on the expo-
sure glass, paper is empty, or the punch 
waste box is full.

Five short beeps repeated 
five time.

Strong alert.

The machine requires user attention 
because paper have jammed, the toner 
needs replenishing, or other troubles 
have occurred.