Справочник Пользователя для Rimage Auto Printer RAS10
Maintain the AutoPrinter
Prism printer
To align your Prism printer, use the following instructions.
#
Required tools:
• T25 Torx screwdriver
• 5/32”
• 5/32”
Allen
wrench
1. Power on the AutoPrinter.
Note: If the Prism power switch is in the on position, power on both the printer and the
power switch.
AutoPrinter by pressing the AutoPrinter
2. Wait for the unit to complete initialization.
3. Prepare the unit for alignment.
a. Manually slide the lift arm to the top of
the AutoPrinter.
b. To place a disc in the gripper, push
the disc up into the gripper while
pressing the disc release button.
pressing the disc release button.
c. Release the button. The gripper holds
the disc.
d. Press
the
printer button to open the
printer tray.
4.
Lift
Arm
Arm
Gripper Disc Release Button
Align the printer.
a. Slowly slide the lift arm
down until the disc just
touches the print pad.
touches the print pad.
Lift
Arm
Arm
Side to Side
Alignment
Alignment
Print
Pad
Pad
Holding Pins
Printer
Button
Button
110656_H
9