Справочник Пользователя для RCA DRD212NW

Connecting the DSS Receiver

Connection C (Good Picture and Sound Quality)

To use this connection you must have:

• TV with RF input (jack)

• VCR with RF and audio/video inputs

• Coaxial and audio/video cables

To connect TV, VCR, and antenna or cable box.

1. Connect coaxial cables as shown.

2. Connect audio/video cables as shown.

To receive DSS programming:

1. Set DSS receiver 3/4 switch to CH3 or CH4 (whichever is not

being broadcast in your area.)

2. Tune TV to whichever channel you set the DSS receiver 3/4

switch to in the previous step.

To receive off-air programming (no cable box):

1. Turn DSS receiver off (or press TV/DSS button).

2. Turn VCR receiver off (or press VCR’s TV/VCR button).

3. Tune TV to desired channel.

To receive cable programming (with cable box):

1. Turn DSS receiver off (or press TV/DSS button).

2. Turn VCR receiver off (or press VCR’s TV/VCR button).

3. Tune TV to cable box output channel

(usually CH2, CH3, or CH4).

4. Tune cable box to desired channel.

To record DSS programming:

1. Set DSS receiver 3/4 switch to CH3 or CH4

(whichever is not being broadcast in your area.)

2. Tune TV to whichever channel you set the DSS receiver 3/4

switch to in the previous step.

3. Tune DSS receiver to desired channel.

4. Set VCR to record on line input.

To view VCR programming:

1. Tune TV to VCR output channel (usually CH3 or CH4).

2. Turn DSS receiver off (or press TV/DSS button).

Note: You can use your stereo amplifier line input to hear stereo using this
connection. See your stereo amplifier’s Owner’s Manual for specific information.