Справочник Пользователя для RCA AM / FM Dual Wake Clock Radio with Remote RP3765

17

For catnaps up to 2 hours without
disturbing the regular alarm settings, the
NAP function wakes you up after a short
period of time. Simply:

1. Press NAP, the NAP indicator will flash.

While the NAP  indicator is flashing,
press REV or FWD to adjust nap time.
The time range is from 10 minutes to 2
hours at 10 minutes interval (default is
20 minutes).

2. Wait 3 seconds or press NAP again to

confirm, the NAP  indicator will show
on the display.

3. Press NAP once to show time left, after

3 seconds, the display will return to
clock time.

When the NAP alarm sounds, you can
press OFF to stop it.

Press and hold NAP for 5 seconds to
cancel the nap setting.

This operation allows extra sleep time
after the alarm is on. The alarm will be
off by pressing SNOOZE until the snooze
period is over.  Snooze function can be
used repeatedly up to 2 hours. After this,
the alarm will turn off until the next
alarm conditions are met. Set the
“quiet” period as follow:

1. While pressing SNOOZE, press REV or

FWD  to set the “quiet” period (the
default time is 9 minutes) from 1 minute
to 30 minutes. Release SNOOZE, then
the “quiet” period is set.

Slide the AUTO BRIGHTNESS switch

AUTO BRIGHTNESS

ON

OFF

 at the back of the unit to the

ON position. The brightness of the LCD
display will vary automatically according
to the environment.
Slide to the OFF position, the display will
remain at its brightest level.

You can choose among 4 different
backlight color - green, blue, amber and
white.

1. Before a specific color is set, the back-

light color will keep changing.

2. Press Color Select 

Color Select

 at the back

of the unit to toggle among different
backlight color.

3. If the AC power and backup batteries

are removed, the 4 backlight colors will
starting changing again once the AC
power is resumed.

Tip:
Only alarm tone can be se-
lected in NAP mode.