Справочник Пользователя для Radware VOYAGEUR GRAND WOOD INSERT VOYA-GRAND-MBK

Page  22

7075-166

September 25, 2012

R

1.  The  grille  on  the  blower  access  assembly  is  hinged.

Swing  the  grille  downward  to  expose  the  2  screws.

2.  Remove the 2 screws from the blower access assembly 

and slide assembly away from the appliance.

3.  Disconnect the wires from the blower.   
4.  Remove the 2 screws from the hold down bracket and

pull the blower and bracket forward.

5.  Remove the blower from the hold down bracket.
6. Remove the protection guards from each end of the 

blower.

7.  Re-install in reverse order.  Be certain that the hold down 

bracket’s  screws  are  completely  seated  in  the  grom-

ments. Insert the locating tab in the hold down bracket

into the placement slot.

Shock Risk.

•  Do NOT remove grounding prong from plug.
•  Plug directly into properly grounded 3 prong

receptacle.

•  Route cord away from appliance.
•  Do NOT route cord under or in front of appliance.

Do NOT allow hot coals or embers to overflow ash lip

• 

May melt protective wire coating on fan power 

cord causing electrical short, fire or injury

Blower Access 

Assembly

Grille hinges 

downward

Remove Screws & 

Pull Access Assembly 

away from Insert

Hold Down 

Bracket

Remove Screws from Hold 

Down Bracket and Pull 

Forward

Placement Slot