Справочник Пользователя для Python 232-835

table top, with the other hand give 

the Removal Tool a quick snap-turn 

in the 

CLOCKWiSe DiReCtiON.

3.  Once the drive roll is loose, 

continue to spin drive roll in the 

clockwise direction to remove the 

drive roll from the gun.

4.  Install a new drive roll on the left-hand threaded shaft.  The drive roll will 

self-tighten when it is feeding wire.

(Reference Figure 3)

1.  Using a slot type screwdriver, loosen idler screw, taking care not to lose 

lock washer under idler roll.

2.  Insert new idler roll and lock washer onto screw, insuring that idler groove 

is toward top and lock washer is beneath.

3.  Tighten.

 

Insulated Drive Roll Kits are used to prevent preheating of the wire which 

may soften it and clog the liner.  This picking up of current at the drive rolls 

rather than at the contact tip is usually not a problem unless using too large 

of a contact tip or excessively oxidized aluminum wire.
insulated Groove Drive Roll Kit ..................................................... 005-0640

For 

.030" (0.8mm) dia. aluminum wire.  Includes insulated groove drive roll 

and insulated

 idler roll assy. 

For 

.035" (0.9mm) dia. aluminum wire.  Includes insulated groove drive roll 

and insulated idler roll assy. 
insulated Groove Drive Roll Kit ..................................................... 005-0642

For 

.040" (1.0mm) dia. aluminum wire.  Includes insulated groove drive roll 

and insulated idler roll assy. 
insulated Groove Drive Roll Kit ..................................................... 005-0718

For 

3/64" (1.2mm) dia. aluminum wire.  Includes insulated groove drive roll 

and insulated idler roll assy. 
insulated Groove Drive Roll Kit ...................................................... 005-0644

For 

.062" (1.6mm) dia. aluminum wire.  Includes insulated groove drive roll 

and insulated idler roll assy. 

 

Includes left and right handles, screws and drive roll door.