Справочник Пользователя для PROLINK Huricane 9200/S
Hurricane 9200/S ADSL Ethernet Router User’s Guide
26
+
-!.(//
0
If you use the Hurricane 9200/S’s USB port to connect to a PC, you
must install the provided USB driver software on the PC. The driver
enables Ethernet-over-USB communication with the Hurricane
9200/S.
Configuring the USB computer is a two-part process:
Configuring the USB computer is a two-part process:
In USB Driver Installation Part 1, you install the USB driver
on the PC.
In USB Driver Installation Part 2, you configure the IP
properties on the PC.
USB Driver Installation Part 1. Installing the USB Driver on the
PC:
1. Ensure that the USB cable
is not connected
to the USB
port on the PC. The installation program will prompt you
when to connect the cable.
2. Copy the USB installation files to a temporary directory on
the USB computer.
3. In the folder where you copied the files, double-click on
setup.exe to start the DSL Modem Setup Wizard.
4. The Installing window displays as the Wizard prepares your
system for the installation:
Figure 2. USB Setup Wizard: Installing Page
If a Microsoft digital signature dialog box displays, click
to continue.
The Installer begins copying the necessary installation files to
the required locations. When complete, a window displays,
prompting you to connect the USB cable to your computer.