Справочник Пользователя для PROLINK Huricane 9200/S

Скачать
Страница из 205
 
 
 
 
74 
 
 
 
Configuring the System Operating Modes 
The Hurricane 9200/S can operate as a router, a bridge, or both. 
The system operating mode is determined by how you configure the 
LAN and WAN interfaces to exchange data within your network and 
with your ISP. This chapter provides an overview of how routers 
and bridges work, and explains how to configure the device 
interfaces and other settings to meet the needs of your network and 
ISP connection type.
 
>
# ,+ "
"
Both bridges and routers enable communication between two 
networks, such as a home network and ISP’s network of Internet 
access servers. Although to an end-user they may appear to 
provide the same functionality, bridges and routers operate 
differently and provide different services. Some ISPs require their 
customers to use a bridge connection, whereas others allow a 
routed connection. 
! # + "
5
Bridges enable computers on two networks to communicate as if 
they are on two segments of the same physical LAN. A bridge 
learns the hardware IDs of all computers on each network it is 
attached to. (These hardware IDs are assigned by manufacturers to 
devices such as network interface cards that enable computers to 
connect to networks.) The bridge determines which hardware IDs 
are connected on each side of the bridge, and stores these 
associations in its bridge forwarding table.  
For example, when the Hurricane 9200/S is acting as a bridge, it 
learns to associate the hardware IDs of each of your LAN 
computers with its LAN interface (e.g., eth-0 or usb-0), and the 
hardware IDs of your ISP’s access server(s) with its WAN interface 
(e.g., eoa-0).  
When the bridge receives a data packet, the bridge compares the 
packet’s destination hardware ID to the entries in its bridge 
forwarding table. When the packet's destination ID matches one of 
the entries, it forwards the packet through the associated interface, 
where the computer with the matching hardware ID can claim the 
packet. When the bridge does not recognize a packet’s destination 
hardware ID, it broadcasts the packet through all of its interfaces – 
to each network it is attached to.  
Hardware IDs
 
are also referred to as Media Access Control (MAC) 
addresses
.
 Ethernet is a commonly used “MAC-layer” network 
protocol. Bridges provide a simple way to allow two or more 
Ethernet-based networks to share data, without requiring additional 
internetworking protocols. Bridges generally cannot link networks 
that use different MAC-layer protocols.