Справочник Пользователя для PROLINK Huricane 9200/S

Скачать
Страница из 205
Hurricane 9200/S ADSL Ethernet Router User’s Guide 
 
86
 
,
A*+8 "
The Hurricane 9200/S offers a special type of bridging mode called 
ZIPB (Zero Installation PPP Bridge) mode. This mode enables the 
ISP to simplify the installation process for customers who will be 
using the device as a bridge. ZIPB mode also allows customers to 
use the embedded firewall features, which are normally not 
available on bridged connections.  
 
Note
 
Contact your ISP to determine if they offer this connection type 
before you configure it. 
 
With ordinary DSL modems that use a bridged connection to the 
ISP, the customer must install a program on their PC called a PPP 
client. This program enables the customer to log in to the ISP’s 
access server and acquire IP information that the computer needs 
for all subsequent Internet communication. In ZIPB mode, the 
Hurricane 9200/S uses its own PPP software to communicate at 
startup with the ISP. The ISP assigns the IP information to the 
device’s PPP interface, which then uses its DHCP server to pass 
the information on to the user’s PC. Therefore, the PPP interface 
and the user’s PC both use the same IP address. 
Working with your ISP, follow this procedure to enable ZIPB mode: 
1.  Ensure that your PCs are configured to accept IP information 
assigned by a DHCP server. See “Quick Start Part 2 — 
Configuring Your Computers,” for instructions.  
2.  Ensure that at least one PPPoE or PPPoA interface has 
been created on the Hurricane 9200/S. See Chapter 5 for 
instructions. 
The Status field for the PPP interface must be set to Start on 
Data. You can modify an existing interface to set this property. 
 
Note
 
If you have more than one computer on your LAN and your ISP 
provides multiple public IP addresses for those computers, you 
must establish a PPP interface for each public IP address. 
3.  If it does not already exist, create a DHCP server pool with 
poolid=0.  
The pool should include at least one unique private IP address 
for each computer on your LAN. The gateway IP address 
should be set to the address of the LAN interface, which must 
be in the same subnet (see Chapter 4 for instructions). 
4.  Enable DHCP server, as described in “Setting the DHCP 
Mode” on page 101. 
5.  Click the Services tab to display the NAT Configuration 
page. If the NAT feature is enabled, click the Disable radio 
button. 
6.  Click the Bridging tab to display the Bridging page, and then 
click the ZIPB: Enable radio button. 
7.  Click the Bridging: Disable radio button.