Справочник Пользователя для Procom CGA7740N

Configuring the Wireless ADSL Modem Router

15

Some applications require multiple connections, such as Internet 
gaming, video-conferencing, and Internet telephony.

These applications may not work when Network Address Translation 
(NAT) is enabled. If you need to run applications that require multiple 
connections, use these pages to specify the additional public ports to be 
opened for each application.

This page displays the current NAPT (Network Address Port 
Translation) address mappings.

4.6.2 Maintenance
Use the Maintenance menu to backup the current configuration, restore 
a previously saved configuration, restore factory settings, update 
firmware, and reset the ADSL Wireless Base Station.

Choose a function and click "Next>>".

"Backup" allows you to save the ADSL Wireless Base Station’s 
configuration to a file.

"Restore" can be used to restore the saved backup configuration file.
"Restore to Factory Defaults" resets the ADSL Wireless Base Station to 
the original settings. You will be asked to confirm your decision.

Use the Firmware Upgrade screen to update the firmware or user 
interface to the latest versions. Download the upgrade file from 
www.philips.com/support (Model CGA5722), and save it to your hard 
drive. Then click "Browse..." to look for the downloaded file. Click 
"BEGIN UPGRADE". Check the Status page Information section to 
confirm that the upgrade process was successful.

Click "REBOOT ROUTER" to reset the ADSL Wireless Base Station.
If you perform a reset from this page, the configuration will not be 
changed back to the factory default settings.

If you use the Reset button on the rear panel, the ADSL Wireless Base 
Station performs a power reset. Press the button for over five seconds, 
and the factory default settings will be restored.