Справочник Пользователя для Pelco Network Cables C2485M-D

16

C2485M-D  (7/05)

 To interface with a Spectra III dome drive or IPS-RDPE-2 remote data port using a iPAQ Pocket PC, first 
install the control/upload utility and then install the IPS-CABLE. 

The Control/Upload Utility is compatible with the following:

iPAQ Pocket PC 3100 series through 3800 series with Windows CE 3.0 for PocketPC or PocketPC 
2002

Devices other than iPAQ that use Windows CE 3.0 for PocketPC or PocketPC 2002 should be 
compatible.

NOTE: Know how to operate an iPAQ pocket PC before attempting to control or upload software 
using the IPS-cable. 

1. Insert the Resource CD into the CD drive. The main menu appears on the monitor. 

2. Connect the iPAQ to the PC. 

3. Click the Install Control/Upload Utility button. The Install Shield Wizard starts. Follow the 

instructions displayed on the monitor.

To install the IPS-CABLE, refer to Figure 3 and do the following: 

1. Connect a null modem cable (not supplied) to the serial port on the Pocket PC. 

2. Connect the 9-pin male connector from the IPS-CABLE to the null modem cable. 

3. Connect the IPS-CABLE to the RJ-45 port of the Spectra III dome drive or IPS-RDPE-2.

NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source.