Справочник Пользователя для Pelco Universal Keyboard KBD300A
[ 28 ]
Pelco Manual C527M-L (3/04)
Table D. Keyboard Functions (continued)
Function
Procedure
Patterns
Programming and operation varies with the receiver type.
Spectra
Spectra
®
domes (before version 3.0) can use one long (1 minute) or two
short (0.5 minute) patterns. Spectra domes (version 3.0), Spectra II
™
domes and Esprit
®
Integrated Positioning Systems can use one long
(1.5, 3 or 6 minutes) or two short (0.75, 1.5 or 3 minutes) patterns. (Select pat-
tern lengths at the positioning system’s menu.) Spectra III
tern lengths at the positioning system’s menu.) Spectra III
™
can use four
patterns of varying length (all drawing from the same block of memory, which
is almost infinite).
To program Spectra and Esprit, select a camera (1-16)
is almost infinite).
To program Spectra and Esprit, select a camera (1-16)
��
, select a long
pattern by holding down PATTERN
��
for two seconds, or select short
pattern 1 or 2 by entering 1 or 2
��
and holding down PATTERN
��
for two
seconds. The monitor will indicate the programming function is active. Move
the camera position
the camera position
��
as desired for the pattern and press ACK
��
to close
the programming function.
To run a long pattern, press PATTERN
To run a long pattern, press PATTERN
��
. To run a short pattern, enter 1 or 2
��
and press PATTERN
��
. Move the joystick
��
or call a preset
�
to stop.
Direct Mode is the same as above, except:
Do not program a pattern with turbo pan on (switch 6).
To program Spectra III, enter 95, and then hold down PRESET
Do not program a pattern with turbo pan on (switch 6).
To program Spectra III, enter 95, and then hold down PRESET
�
for about 5
seconds until the main menu appears. Use the joystick to position the cursor
beside Patterns and press IRIS OPEN
beside Patterns and press IRIS OPEN
��
. Position the cursor beside Pattern
Number and press IRIS OPEN
��
. Position the cursor beside Program Pattern
and press IRIS OPEN
��
. Follow the directions displayed on the monitor.
To run a Spectra III pattern, press the pattern number (1-4)
��
and then
PATTERN
��
. Move the joystick
��
to stop.
Sequence*
Sequence steps through all 16 cameras. Camera number, camera title,
sequence status, and time/date are shown on the monitor.
Press PREV
sequence status, and time/date are shown on the monitor.
Press PREV
4A
to step back one camera. Hold for two seconds for a back-
ward sequence. Monitor shows B. Press during sequence to speed up. Press
during a forward sequence to reverse.
Press NEXT
during a forward sequence to reverse.
Press NEXT
4B
to step forward one camera. Hold for two seconds for a
forward sequence. Monitor shows F. Press during sequence to speed up.
Press during a backward sequence to go forward.
Press HOLD
Press during a backward sequence to go forward.
Press HOLD
4C
to hold a sequence. Monitor shows H. Press HOLD to
resume.
Manually select a camera or press CAM
Manually select a camera or press CAM
��
to turn off a sequence. Monitor
shows O.
Macro Sequence*
Enter 1 or 2
��
and press MACRO
�
to start a group camera sequence. Monitor
shows M. Refer to your switcher manual for macro/sequence programming.
Multiplexer Displays
*
Press SHIFT
�
. Shift key LED
�
lights. The function keys F1 through F3 and
the auxilary keys can now be used to display the images from multiple cam-
eras on the monitor.
F1/LATCH: Zoom
F2/OFF:
eras on the monitor.
F1/LATCH: Zoom
F2/OFF:
PIP display
F3/MOM: Quad display
AUX ON:
AUX ON:
9-screen display
AUX OFF: 16-screen display