Справочник Пользователя для Pelco pelco ips-rdpe-2
8
C2473M-D (10/06)
Cable/Wire Requirements and Connector Locations
Refer to Figure 3 for a layout of the data port box connectors.
It is important to connect all four communication wires from the IPS-RDPE-2 to the Spectra dome system or ExSite system. It will not be possible
to perform software and language file uploads if the transmit and receive wires are not connected.
to perform software and language file uploads if the transmit and receive wires are not connected.
Figure 3. IPS-RDPE-2 Connections
NOTES:
•
Input power for the IPS-RDPE-2 is 24 VAC only.
•
The maximum wire gauge allowed for power input and output is 12 AWG.
•
The maximum wire gauge allowed for two-wire communication and unshielded twisted pair (UTP) is 16 AWG.
=POSITIONING
SYSTEM
CONNECTIONS
OPTIONAL