Справочник Пользователя для Pelco pelco ccc4000
Pelco Manual C1925M (3/99)
5
INSTALLATION
CAMERA MOUNTING
Mount the camera using a 1/4–20 mounting screw that does not exceed .197" (4.5 mm
±
.2
mm) in length (refer to Figure 2).
An optional CA1750 Mount Adapter is supplied to attach the camera to a ceiling mount.
To install the adapter (refer to Figure 3):
1.
Place the camera inside the adapter and align the camera mount boss with the
elongated hole in the adapter.
elongated hole in the adapter.
2.
Attach the camera to the adapter with the provided 1/4-20 bolt and washers.
3.
Attach the adapter with camera to the 1/4-20 threaded stud on the installed mount
swivel head. Tighten the knurled nut on the mount against the adapter.
swivel head. Tighten the knurled nut on the mount against the adapter.
Figure 2. Camera Mounting Screw
7 in. (ASA standard)
-inch UNC (20 pitch)
Figure 3. CA1750 Mount Adapter
CAUTION:
Be
careful not to dam-
age the camera by
age the camera by
screwing the adapter too far
onto the threaded stud. As
soon as the stud threads ap-
pear through the adapter
captive nut, tighten the
knurled nut.
onto the threaded stud. As
soon as the stud threads ap-
pear through the adapter
captive nut, tighten the
knurled nut.