Справочник Пользователя для Trilogy Touch Technology Trilogy Commander Digital Intercom 9
Commander Installation Guide
Page
22
of
81
Issue 9
Trilogy Communications Limited
Make any changes as required. Ensure that there are no system conflicts with other PC
hardware by using the Windows Device Manager. Conflicts with other hardware such as
sound cards and network cards may prevent the download adaptor from functioning
correctly.. Any changes within PathFinder must be matched by changes to the adapter card
itself.
hardware by using the Windows Device Manager. Conflicts with other hardware such as
sound cards and network cards may prevent the download adaptor from functioning
correctly.. Any changes within PathFinder must be matched by changes to the adapter card
itself.
Now select the final tab of this form, labelled “Remote Systems”. On installation, only one
system is displayed, as shown below.
system is displayed, as shown below.
Since this version of PathFinder is “network ready”, details of all systems within the
Commander “Network Domain” must be entered on this view. It is important to ensure that
this information is matched on all systems within the domain. For a single “standalone”
system, simply edit the details appropriately.
Commander “Network Domain” must be entered on this view. It is important to ensure that
this information is matched on all systems within the domain. For a single “standalone”
system, simply edit the details appropriately.
NOTE: The system size must be set to 382 (not 384) for a four frame system
and 574 (not 576) for a six frame system.
Make the necessary changes to the System settings, to match hardware and software
parameters. Save the Settings, then close and re-start PathFinder. When prompted, it is not
necessary to save the database, since the tables are newly created and therefore blank.
parameters. Save the Settings, then close and re-start PathFinder. When prompted, it is not
necessary to save the database, since the tables are newly created and therefore blank.