Справочник Пользователя для Triax STR 333

You can select C/KU band by selection of switch type. 

 

 

(None, DiSEqC Switch)

After selecting a satellite, please select position number.  

 

To change value, press the 

 button. 

The position list will be displayed.

Select the proper LNB frequency referring to your LNB using the 

 and 

the

 buttons.

When selecting the C/KU Switch is selected as “None”, the C-LNB Freq 
will be dimmed automatically.
Press the 

 button, and then the C-LNB Freq. list will be displayed. 

You can also input the freq. you want. After inputting freq. 
Using the 

 buttons, press the 

 button. 

 

 

(None, DiSEqC Switch)

Select the LNB Power On or OFF.

Depending on the user’s antenna switch box or LNB. You can supply 
either 22KHz by setting “

” or not by setting “

”.

Depending on the user’s antenna switch box.  (“off”, “SAT A” or “SAT B”)

You can select and use appropriate port for your DiSEqC switch box. 
Press the 

 button to select DiSEqC List. (None, DiSEqC A, DiSEqC B, 

DiSEqC C, DiSEqC D, Motor, USALS)

Press the 

 button to set Drive(Fine Drive or Normal Drive) to run 

the motor.
•

To move the motor, press the 

 button.

•

To move the zero position, press the 

 button.

•

To store the current position, press the 

 button.

•

To set the east limit by current position, press the 

 button.

•

To set the west limit by current position, press the 

 button.

•

To clear the stored limit value, press the 

 button.

12