Справочник Пользователя для Trek TREK-725
Trek-725 User Manual
26
3.8 Installing the Universal Arm
1.
Press latches at the same time and then rotate support-1 until you
can see both of the screw holes.
can see both of the screw holes.
2.
Rotate support-2 until the angle is the same as support-1.
3.
Use four M4x8L screws and attach the U-Arm with the TREK-725.
The 4 stainless screws can be found in the universal arm's box.
The 4 stainless screws can be found in the universal arm's box.
4.
Use latches adjust the angle of TREK-725 (every 14.4° on 360°).
Figure 3.12: Universal Arm
Note
Support-1 can be on the right or left.
Screw-M4x8L
(x4)
Support-2
Support-1
TREK-725
Latch