Справочник Пользователя для Transition Networks BFFG1XXX-1XX

Appendix C:  Device Commands & Definitions  

Transition 

Networks 

 

ifoam port=<portno> 

OAM configuration for the specified port. 

 

Usage: 

ifoam port=<portno> 

 [oam=enable|disable] 

 [oammode=active|passive] 
 [oamrmtloop=enable|disable] 
OAM: 

OAM can be enabled/disabled. 

Oammode: 

OAM Mode can be set to Passive/Active 
Mode. 

Oamrmtloop:  OAM loopback can be enabled/disable 

on the remote Device peer. 

netstat 

Displays all active and passive sockets. 

ping 

Pings the host to check if it is reachable using ICMP 
requests. 

ps 

Displays the system processes. 

reboot 

Saves the current configuration and reboots the system. 

save 

Saves the current configuration to non-volatile memory. 

set  

Sets network settings and system configuration. 
Usage: 

set 

[dhcp=<enable|disable>] 
[ip=nn.nn.nn.nn] 
[netmask=nn.nn.nn.nn] 
[gateway=nn.nn.nn.nn] 

[trapmgr=nn.nn.nn.nn] 
[community=<"value">

(max=64)

] 

[groupstring=<"value">

(max=64)

] 

[radius=<enable|disable)] 

[radiusip=nn.nn.nn.nn] 
[radiussercret=<"value">

(max=64)

] 

[username=<"value">

(max=64)

] 

[password=<"value">

(max=64)

] 

[usb=<enable|disable>] 
[l3capability=<enable|disable)] 
[snmpaccess=<enable|disable)] 
[tftpserver=nn.nn.nn.nn] 

[tftpfile=<"value">

(max=64)

] 

[mgmtvlan=<vlanid>

(2-4096)

 

set autoupg 

Enable/disable auto upgrade. 
When enabled, automatically upgrades the firmware. 
Usage: 

set autoupg=<enable|disable>. This locks/unlocks 

firmware upgrades from an active OAM Device peer. 

 
 

 

24-Hour Technical Support:   1-800-260-1312   International: 00-1-952-941-7600 

123