Справочник Пользователя для Packard Bell EXPRESS ST8000
PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
top and right edge. Left side of page extends to 9.25 inches.
Rack-Mount Subsystem Assembly
Install the DEU into any standard IAE 19" rack
cabinet.
cabinet.
Caution: Ensure that the location of the DEU does not
create an unstable condition when installed in the rack
cabinet enclosure.
create an unstable condition when installed in the rack
cabinet enclosure.
Note: Mount the subsystem into the rack enclosure
before installing the disk drives. This will reduce the
weight required to support during installation.
before installing the disk drives. This will reduce the
weight required to support during installation.
1
Select an appropriate location in your rack cabinet
for the DEU. If you are installing multiple systems,
review the cabling configuration section later in this
chapter for your cable scheme to determine the
optimum location.
for the DEU. If you are installing multiple systems,
review the cabling configuration section later in this
chapter for your cable scheme to determine the
optimum location.
Screw
Plastic
Washer
Front Bezel
Caged Nut
Support Bracket
Screw
Washer
Screw
Caged Nut
Caged Nut