Руководство По Работе для Panasonic Arbitrator 360
Setup
.(continued)
*1 Depending on the settings on the Video Allocation
screen, some items may not be displayed.
*2 The setting upon the last power-off will be restored
when the camera is turned on. If the Memory Card
Video Recorder is not turned off properly, the setting
data upon power-off may not be stored properly.
Item
Factory-Preset
Description
Init Settings after power ON
Initial settings upon power-on
Init Preset Select*
1
Preset 1
Initial Preset setting
Setting values: Preset1, Preset2, Preset3, LAST*
2
Init Video Out 1*
1
Video Out2
Setting of the throughout video signal to the [VIDEO OUT 1] connector
Setting values: CAM1, CAM3, Video Out2, LAST*
2
Classify
Classify information setting
Force Classify
DISABLE
Addition of classify information
Setting values: DISABLE (No addition)
ENABLE (Addition permitted)
FORCE (Forcible addition)
Storage Capacity Warning
Classify information setting
Remaining
Recordable Time
[min]
60
A warning sounds when the remaining recordable time becomes
shorter than the value set here.
Setting values: 30, 60, 90 (minutes)
Warning sound
OFF
Select if a short beep is to sound twice every 30 seconds when the
remaining recordable time becomes shorter than the set value.
Setting values: ON, OFF