Справочник Пользователя для Paladin Tools LAF3438

   3 

BEFORE ATTEMPTING ANY TYPE OF ASSEMBLY, 
OPERATION, MAINTENANCE, OR OTHER WORK ON 
OR NEAR THIS PRODUCT: 
x

x

x 

Read and understand all safety signs on this 
product and on your  power unit, loader, and quick-
attach. 

x 

Know all your controls and know how to quickly stop 
all power unit movement, the Roto-Tiller movement, 
and the engine in case of an emergency. 

x 

Know and obey all applicable government rules, 
O.S.H.A. regulations, local laws and other 
professional guidelines for your operation. 

x 

Make sure that anyone who will be assembling, 
mounting, maintaining, repairing, removing, and/or 
storing this product: 
x 

has been instructed in the safe operation of this 
product and of the power unit and quick-attach 
to which this product is attached. 

x 

is physically and mentally capable of the safe 
operation of this type of equipment. 

x 

is not under the influence of drugs or alcohol. 

x 

is carefully supervised from a safe distance, 
especially if such person is inexperienced. 

x 

wears appropriate protective equipment (i.e. 
hardhat, safety glasses, work gloves, protective 
shoes, respirator, ear protection, etc.). 

x 

does not wear loose fitting clothing, loose or 
uncovered hair, or any accessories (jewelry, 
necktie, scarf, wrist watch, etc.) that can catch in 
moving parts. 

x 

has annually reviewed all safety instructions. 

x 

Know and follow good work practices when 
assembling, mounting, maintaining, repairing, 
removing, and storing this product: 
x 

Work on a level surface in a well lit area. 

x 

Keep the area clean and dry. 

x 

Use properly grounded electrical outlets & tools. 

x 

Use the right tool for the job at hand. 

x 

Make sure that your tools are in good condition for 
performing the desired function. 

x 

When using tools, wear the protective equipment 
specified by the tool manufacturer. (i.e. hardhat, 
safety glasses, work gloves, protective shoes, etc.) 

WHEN YOUR POWER UNIT IS USED DURING ANY 
TYPE OF ASSEMBLY, OPERATION, MAINTENANCE, 
OR OTHER WORK ON OR NEAR THIS PRODUCT:
x 

Before leaving the operator’s station or before 
beginning any type of work on this product, lower 
this product to the ground, apply your power unit’s 
parking brake, stop the engine, remove the starter 
key, wait for all moving parts to stop, and then 
relieve all pressure in the hydraulic lines. Refer to 
your power unit’s operator’s manual for instructions 
on how to relieve hydraulic pressure in lines. 

x 

Know your loader’s safe lifting and operating 
capacity and the weight of this product.  See the 
specifications in this manual for the weight of this 
product and refer to your power unit’s and loader’s 
operator’s manuals for safe operating limits.  Lift 
capacity may be reduced if using a  quick-attach. 

x 

Never allow anyone, except the operator, to be 
around the power unit or this product when either is 
in motion. Do not startup unless others are clear of 
the work area. 

x 

Do not allow riders on this product or the power unit. 

x 

Do not stand or climb on this product when raised. 

x 

Do not place any part of your body under any part of 
this product unless this product is securely resting 
on adequate blocking or on the ground. 

x 

Do not use blocking made of concrete blocks, logs, 
buckets, barrels or any other material that could 
suddenly collapse or shift positions.  Do not use 
wood or steel blocking that shows any signs of 
material decay.  Do not use blocking that is warped, 
twisted, or tapered. 

x 

Never operate controls from the ground.  Operate 
the controls only from the operator’s station. 

x 

Never leave equipment unattended with the engine 
running or with this product raised on the loader. 

x 

Be aware of the added weight and width of this 
product. Reduce travel speeds accordingly, 
especially when traveling over rough ground. 

x 

Keep this product close to the ground and under 
control when transporting.