Справочник Пользователя для Telex FMR-500

1. Place the re ceiver and an ten nas where there is a

clear line of sight to the area where the trans mit -
ter will be used. Ro tate the an ten nas to sep a rate
them by 90 de grees.

2. Con nect the power sup ply cord to the re ceiver. 

Plug the power sup ply into an AC out let. Turn
the re 

ceiver on and con 

firm that it is ON by

check ing the main dis play screen. 

3. Man ual  Chan nel  Change.  Press the SET but -

ton and the Group num ber will start to flash.
The Up and DOWN but tons al low you to scroll
through the fac tory set group. When the group
you de sire is dis played, press SET to se lect that
group and the Chan nel Num ber will start flash -
ing. Scroll to the de sired chan nel and press SET
to se lect. The num bers will stop flash ing and the 
new group and chan nel are in stalled.

Groups and Chan nels), press SET and UP at
the same time and the group and chan nel will go 
blank and the Fre quency will start flash ing. Use
UP/DOWN to scroll in 25 KHz steps to the de -
sired fre 

quency. Press SET and the fre 

quency

will be se lected and stop flash ing. Press Set and
UP at the same time to re turn to group and chan -
nel op er a tion. Hint: hold ing in the Up or Down
key will in crease the speed of the scroll. Just re -
lease and press again for fine con trol.

This  fea ture  au to mates

the pro cess of find ing a clear group of
inter-mod u la tion free chan nels and the clear est
chan nels within those groups. 

for Groups: From the main dis 

-

play screen, push SET once and the Group
Num ber will flash. While Group is flash ing,
press and hold SET un til ClearScan ap pears,
re 

lease the set key. When the scan is com 

-

pleted, the dis play will show the group with
the most clear chan nels and the Chan nel num -
ber will in di cate how many clear chan nels are
in that group. Use the UP/DOWN keys and to
view other groups and press SET to se lect a
group. The Group will be set and the Chan nel
will start to flash. Se lect a chan nel man u ally
or use ClearScan for Chan nels.

nels: To scan for the

clear est chan nel in a group, press and hold set
while the Chan nel is flash ing un til ClearScan
ap 

pears, re 

lease the SET but 

ton. When the

scan is com 

plete, the dis 

play will show the

clear est avail able chan nel. Use UP/DOWN to
scroll through the other avail 

able chan 

nels

rank from clear est to least clear (but still avail -
able for use, ClearScan will not dis play any
chan nel that can't be used). Press SET to se -
lect the chan nel.

Auto ClearScan: This func tion will find the
clear est group and chan nel with the press of
just one but ton. With noth ing flash ing, press
and hold the SET but ton un til ClearScan ap -
pears on the right side of the screen. When the 
scan is com plete, the re ceiver will be set to the 
clear est chan nel in the clear est group.

ClearScan Band: While in the Fre 

quency

Mode, this func tion will scan the en tire band
look ing for the clear est fre quency, re gard less
of groups and chan nels. In Fre quency Mode,
press Set once and the fre quency will flash,
press and hold set until ClearScan ap pears on
the right side of the dis 

play. The scan will

con tinue un til you press Set again so you can
scan a lo ca tion over night, 24 hrs, a week, or a
few sec onds. When you press Set again, the
scan will stop and the clear est fre quency will
be dis 

played. You can scroll through the 8

clear est fre quen cies us ing the Up and Down
but tons. Press Set to ac cept the fre quency dis -
played.

-2-

R

8 5

7

6

4

GPA CH
12u 05

-20 -10 -6  -

 

3   0  +3

1   3  10   30   100

E V
AU DIO

R

3

3

2

1

R

Power ON/OFF

Graph i cal  Dis play

Chan nel  Dis play

Fre quency

Bat tery  Strength
In di ca tor

Di ver sity  In di ca tor

RF Strength of

Sig nal  In di ca tor

Au dio  Level  In di ca tor

Gui tar  Mode  In di ca tor

Dis play  Con trol  But tons  (Set/Up/Down)

Power  Con nec tor

XLR  BalancedMic/Line Level
Au dio Out put Line Level Ad just able

Un bal anced Line Level Au dio Out put
Con nec tor  with  Level  Ad just ment

TNC  An tenna  In put  Con nec tors

Power Cord Re tainer