Справочник Пользователя для Teledyne Camera Accessories T100
Teledyne API - T100 UV Fluorescence SO2 Analyzer
Remote Operation of the Analyzer
181
for trouble-shooting and reference purposes. Terminal emulation programs such as
HyperTerminal can capture these messages to text files for later review.
HyperTerminal can capture these messages to text files for later review.
8.3. REMOTE ACCESS BY MODEM
The T100 can be connected to a modem for remote access. This requires a cable
between the analyzer’s COM port and the modem, typically a DB-9F to DB-25M cable
(available from Teledyne API with P/N WR0000024).
between the analyzer’s COM port and the modem, typically a DB-9F to DB-25M cable
(available from Teledyne API with P/N WR0000024).
Once the cable has been connected, check to ensure that the DTE-DCE is in the correct
position (refer to Section 6.1). Also ensure that the T100 COM port is set for a baud rate
that is compatible with the modem, which needs to operate with an 8-bit word length
with one stop bit.
position (refer to Section 6.1). Also ensure that the T100 COM port is set for a baud rate
that is compatible with the modem, which needs to operate with an 8-bit word length
with one stop bit.
The first step is to turn on the MODEM ENABLE communication mode (Mode 64,
Section 6.2.1). Once this is completed, the appropriate setup command line for your
modem can be entered into the analyzer. The default setting for this feature is:
Section 6.2.1). Once this is completed, the appropriate setup command line for your
modem can be entered into the analyzer. The default setting for this feature is:
AT Y0 &D0 &H0 &I0 S0=2 &B0 &N6 &M0 E0 Q1 &W0
This string can be altered to match your modem’s initialization and can be up to 100
characters long.
characters long.
06807C DCN6650