Справочник Пользователя для Technicolor - Thomson DTH 8540

Connections and initial set up

Sorting the channels

11.

A window for classifying the channels appears with the images of the selected channel.

The automatic channel search has assigned numbers to the channels in a predefined order.These
numbers may not be the numbers you would have chosen. Should this be the case, you can
change these numbers by following the instructions at the bottom of the screen. For easy channel
identification, we suggest you have a TV magazine at hand.

Note: Channel sorting instructions:
Move: press

(then the

▼

▲

keys until you reach

the desired position (Pr no. on the left of the list then

swapping of the 2 channels).

Delete:

EXIT

key.

Rename:

INFO

key then in the grid,

▼

▲

keys to

choose a name letter by letter in the list. Validate by pressing

Decoder adjustment:

key (indicates that the images of the

selected channel will be decrypted by a decoder, of the

ANAL

+ type, connected to connector

AV2

. The symbol of a

decoder displayed alongside the name of the channel confirms
the adjustment).

12.

When all channels have been sorted to your liking, press the

STOP

key.

13.

Your DVD recorder has an automatic time (and date) setting function. In general, no setting is
required on your part. If the time and date information are correct, select Done by pressing

several times. A message appears. It indicates that the installation of the channels are now

complete. Press

.The main menu of your DVD recorder appears.

Clock setting

AutoClock:

If the time and date are incorrect, adjust the clock as described below, check that

automatic time updating is activated.The time setting of the DVD recorder is important for the
correct functioning of your programmed recordings.

Select Year. Enter the year’s 4 digits (press 2

for 2005).

Then enter the 4 digits of the date (press 1

5 for

15th May).

Enter the 4 digits of the time
(press 1

6 for 11:06pm). Press B to display Yes

for the auto clock.

Then press twice on

OK.

The Main Menu will appear

again. Channel set-up is complete.

Note:You can now use your DVD recorder and take advantage of its numerous functions. If you want to
connect a satellite receiver to your DVD recorder, refer to page 14 for the recommended connection.You can
also complete your installation through the settings available in the System Options menu (refer to
pages 64-65). These adjustments depend on the other devices that you are likely to connect to your DVD
recorder.

If you want to redo the automatic channel set-up, you will have to select Interactive setup in the
Installation menu (in the Setup menu).

2_DTH8540-50_en.qxd 11/08/05 11:40 Page 7