Справочник Пользователя для Tandberg Data Data Network Router MSE 8321
10
Configuring the MCU
If you are connecting the ISDN gateway to a Codian MCU, refer to this section for
information.
information.
Adding the ISDN gateway
To simplify the making of outgoing calls by ISDN, you can configure your MCU. To
do this:
1
do this:
1
Using your web browser, navigate to the web interface of the MCU.
2
Go to
Gateways
.
3
Click
Add new H.323 gateway
.
4
Enter a name for the gateway, such as Codian ISDN gateway, and specify the IP
address of the ISDN gateway. Leave all other fields unchanged.
address of the ISDN gateway. Leave all other fields unchanged.
5
Click
Add H.323 gateway
.
Configuring endpoints
The simplest way to call ISDN endpoints from your MCU using the ISDN gateway is
to define pre-configured endpoint definitions for any endpoints you wish to call.
To define pre-configured endpoint definitions:
1
to define pre-configured endpoint definitions for any endpoints you wish to call.
To define pre-configured endpoint definitions:
1
Using your web browser, navigate to the web interface of the MCU.
2
Go to
Endpoints
.
3
Click
Add H.323
.
4
Enter a name for the endpoint, such as CEO ISDN phone.
5
In the
Address
field, type the phone number of the endpoint.
6
Select the gateway you have just added for
H.323 gateway
. Leave all other fields
unchanged.
7
Click
Add endpoint
.
You can now call out to this endpoint as described in the next section.