Справочник Пользователя для Ositech comm Trumpcard Data/Fax Modem
User’s Guide and Reference
4 - 5
Basic Modem Operation
Re-Dialling the Last Number
To re-dial the last number you called, enter:
ATDL [ENTER]
Storing a Number
If there are some numbers that you call regularly, you may want to store
them so that you do not have to enter the whole number every time you
call. You can store up to four numbers (in locations 0-3). Each number can
be up to 36 characters long.
them so that you do not have to enter the whole number every time you
call. You can store up to four numbers (in locations 0-3). Each number can
be up to 36 characters long.
To store the number 1-999-555-1212 in storage location 3, enter:
AT&Z3=19995551212 [ENTER]
Dialling a Stored Number
To dial 1-999-555-1212 (that you stored as number 3), enter:
ATDS=3 [ENTER]
Connection Messages
Once you connect to the remote Modem, your Modem will respond with
one of the following messages. (If the remote Modem responds with
garbled characters or seems to have locked up, refer to
one of the following messages. (If the remote Modem responds with
garbled characters or seems to have locked up, refer to
Setting Up For a
Non-Error Correcting Connection before you try again.)
The Modem may respond with a short form (numeric code) or a long form
(prompt). Refer to the ATXn command description in Section Three to
control how the Modem responds.
(prompt). Refer to the ATXn command description in Section Three to
control how the Modem responds.
Short
Long
Description
Form
Form
0
OK
command successful
1
CONNECT
connection at 300 bps
2
RING
incoming call
3
NO CARRIER
no carrier detected
4
ERROR
invalid command
5
CONNECT 1200
connection at 1200 bps
6
NO DIAL TONE
no dial tone detected
7
BUSY
remote Modem line is busy
8
NO ANSWER
remote Modem did not answer call
9
CONNECT 0600
connection at 600 bps
10
CONNECT 2400
connection at 2400 bps
11
CONNECT 4800
connection at 4800 bps