Справочник Пользователя для Omnia Industries TV Cables 6FM
Omnia 6 Use and Installation Guide – Version 1.00a
92
92
Omnia-6fm System Parameters
A 'syspara' is an Omnia 6 System parameter. The System Parameters are assigned to controls which givern
overall operation, such as Input and Output Gains, Pre-emphasis/De-emphasis, etc. These parameters
would NOT be saved with individual presets, but instead are saved using the Save To Card command on
Omnia 6 Remote control, or through the Save to Card option in the front panel's System menu.
overall operation, such as Input and Output Gains, Pre-emphasis/De-emphasis, etc. These parameters
would NOT be saved with individual presets, but instead are saved using the Save To Card command on
Omnia 6 Remote control, or through the Save to Card option in the front panel's System menu.
To obtain a list of all System parameters, you use the command 'sysparas', which lists all of the adjustable
parameters in a table format. Example: typing sysparas <enter> displays the following table:
parameters in a table format. Example: typing sysparas <enter> displays the following table:
1) Input Source [AES/EBU]
2) Analog Gain [0]
3) Input Left [0.0dB]
4) Input Right [0.0dB]
5) Output Left [+8.0dB]
6) Output Right [+8.0dB]
7) SCA Level [-20.0dB]
8) Composite 1 [3.98 V]
9) Pilot Level [10.0%]
10) Phase Adjust [0.0 deg]
11) Deemphasis [50uS]
12) Preemphasis [50uS]
13) Analog Phase [1]
14) LED Source [0]
15) Backlight [70]
16) Contrast [50]
17)
Headphones
[-8.0dB]
18)
Separation
[STEREO]
19) Editing Mode [EXPERT]
20) Current State [DISABLED]
21) Composite 2 [8.46 V]
22) Input Phase [NORMAL]
23) Preemphasis ['n/a']
24) Ctrl Port Baud [19200]
25) Mono Mode [Stereo]
26) Asym Mod ['n/a']
27) Tilt Eq ['n/a']
28) Tilt Freq ['n/a']
29) HP Filter [OUT]
30) Meta ['n/a']
31) LPF Freq ['n/a']
32) LPF Freq ['n/a']
33) BS412 [OFF]
34) Ref. Headroom [12]
35) Ave. Power [82]
36) WB AGC [IN]
37) Phase Rot. [1]
Each 'syspara' is listed along with its currently assigned value, ie, "37) Phase Rot. [1]"
Although listed, the following 'syspara' numbers are not applicable to the Omnia 6fm:
2) Analog Gain
19) Editing Mode
28) Tilt Freq
14) LED Source
20) Current State
30) Meta
15) Backlight
26) Asym Mod
31) LPF Freq
16) Contrast
27) Tilt Eq
32) LPF Freq