Справочник Пользователя для Olevia ZP-500

 

 

8

Please check the battery of Remote Control first, and then start the initial setup. 

When plugged in the power at the first time, after the booting logo, the setup page should display 

to start the initial setting. The first item is the menu language. Please setup the menu language for 
OSD. Use ▲▼ button to select the language and press “ENTER” to confirm. 

 Before beginning this process, if you want to connect HDMI, please connect it first and then 

start the configuration. 

 

The second item is to choose the resolution of the video output according to your TV set and the 

connection between this play and TV set. 

z

  For HDMI TV set, the device detects the available resolution of your TV set and lists them on 

screen. In the list of resolution, the available option is in white characters and the unsupported 
one is in dark characters. We recommend you to select the option “HDMI Auto” which enables the 
maximum resolution on your TV set. 

z

  For YPbPr output, the supported resolution is up to 1080i so select “1080i 50Hz” for PAL TV set or 

“1080i 60Hz” for NTSC TV set for the maximum resolution. For TV set that doesn’t support HD 
input, select “NTSC” or “PAL” for the SD video. 

z

  For CVBS output, choose “NTSC” for NTSC TV set or “PAL” for PAL TV set. 

 The CVBS is always output SD video no matter which resolution is chosen.