Справочник Пользователя для Olympus FE-170/X-760

   EN

This camera uses several lamps to indicate the camera status.

• Performing any of the following operations when not actually taking pictures can 

deplete the battery power.

• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom

• To save battery power, turn off the camera whenever it is not in use.

• Some items may not be selectable from the menus when using the arrow pad.

• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:

[

%], [#], etc.

• Some functions cannot be used when there is no card in the camera.

[PANORAMA]/[FORMAT]/[BACK UP]/[PRINT ORDER]

Lamp

Status

Self-timer lamp

The lamp lights for approximately 10 seconds, blinks for 
approximately 2 seconds, and then the picture is taken.

Card access lamp

Lit (red):

Shooting mode and power is on.

Lit (green):

Playback mode and power is on.

Off:

Power is off.

Blinking (red): A picture is being recorded, the camera is reading 

a movie, or images are being downloaded (when 
connected to a computer).

• Do not do any of the following while the card access lamp is 

blinking. Doing so may prevent the image data from being 
saved and render the internal memory or card unusable.

• Open the battery/card compartment cover
• Remove the battery.
• Connect or disconnect the AC adapter.

Green lamp of the 
monitor

Lit: The focus and exposure are locked.
Blinking: focus is not locked
• Release your finger from the shutter button, re-position the AF 

target mark on the subject and press the shutter button 
halfway again.