Справочник Пользователя для Olympus FE-170/X-760

   EN

•Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, 

color failure, ghosting on the CCD, or may possibly cause fires.

•Do not push or pull severely on the lens.

•Before storing the camera for a long period, remove the battery. Select a cool, dry location for storage 

to prevent condensation or mold from forming inside the camera. After storage, test the camera by 

turning it on and pressing the shutter release button to make sure that it is operating normally.

•Always observe the operating environment restrictions described in the camera’s manual.

•Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback 

mode failure or damage to the monitor.

•A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.

•When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. 

This is not a malfunction; it will be less noticeable in playback mode.

•In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may 

change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally 

place it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will 

recover in normal temperatures.

•The LCD used for the monitor is made with high-precision technology. However, black spots or bright 

spots of light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at 

which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a 

malfunction.

•Olympus makes no representations or warranties regarding any damages, or benefit expected by 

using this unit lawfully, or any request from a third person, which are caused by the inappropriate use 

of this product.

•Olympus makes no representations or warranties regarding any damages or any benefit expected by 

using this unit lawfully which are caused by erasing picture data. 

•Olympus makes no representations or warranties, either expressed or implied, by or concerning any 

content of these written materials or software, and in no event shall be liable for any implied warranty 

of merchantability or fitness for any particular purpose or for any consequential, incidental or indirect 

damages (including but not limited to damages for loss of business profits, business interruption and 

loss of business information) arising from the use or inability to use these written materials or software 

or equipment. Some countries do not allow the exclusion or limitation of liability for consequential or 

incidental damages, so the above limitations may not apply to you. 

•Olympus reserves all rights to this manual. 

Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. 

Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe 

upon the rights of copyright owners. 

All rights reserved. No part of these written materials or this software may be reproduced or used 

in any form or by any means, electronic or mechanical, including photocopying and recording or the 

use of any type of information storage and retrieval system, without the prior written permission of 

Olympus. No liability is assumed with respect to the use of the information contained in these written 

materials or software, or for damages resulting from the use of the information contained therein. 

Olympus reserves the right to alter the features and contents of this publication or software without 

obligation or advance notice.

•Radio and Television Interference

Changes or modifications not expressly approved by the manufacturer may void the user’s authority 

to operate this equipment. This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined