Справочник Пользователя для Qsc Baby Monitor 522ua

17- Select Device, Add Device, from the menu. A new window will open prompting you to name the device. Name it logically, such 
as RAVE 1, or similar. Select the Device Type and select RAVE 522ua. At the Password prompt, enter “qsc” (lower case, no quotation 
marks). This is the device password, separate from the software password. The default, in both cases, is “qsc”, but you are free to 
change either or both. Enter the IP address of the RAVE and click OK.

18- The RAVE will now appear in the inventory root (left side of screen, first with a red “x”, then a yellow exclamation point, then a nor-
mal icon). If the RAVE does not eventually show in the inventory root, check that a crossover cable is used (only for RAVE connected 
directly to PC), check the cable connections, verify IP addresses are set correctly, verify Subnet masks are set correctly, and verify AC 
power is properly applied to the RAVE.

19- Click on the “+” sign of the RAVE 522ua in the inventory root, then the “+” sign of the Flashed Configs. Click on the config with the 
loudspeaker icon. A view of applicable device tabs will open. Click the DSP block and the current DSP configuration of the RAVE will be 
displayed. 

20- Right click on the Design Editor icon in the lower left of your display; select “New”. A new window opens; select RAVE 522ua for 
the device type.

21- Click on Help to access the software’s Help system. All software operation is covered in the on-line help file.