Справочник Пользователя для Nlynx ETU400

ETU400 User Guide 011603

 

Output Queue

OUTQ

output queue name

     Library name

 

*LIBL 

library name

Translation table name

TRANSFILE

TRANSLATE

table file name

     Library name

 

*LIBL 

library name

Translation table member

name

TRANSMBR

ET0A1

member name

The PRTFROM3X command allows you to transfer a print file from the host

to a micro. This command is interactive only. It displays a list of items

in a host print output queue to be reformatted for printing on the micro.

Do not use this procedure. It is intended for use only with

PC-DOS.

The qualified print output queue. This option displays a
print queue screen. On this screen, enter 1 or 2 next to the

print item(s) to be copied for use on the micro.

 

Performs the AS/400 command CPYSPLF, translates

the file for the micro, and stores it in the AS/400 file

which you specify on the TRANSLATE prompt screen (see Figure

10-1 on the following page). You will then transfer the file

to the micro using the FROM3XB command.

2=Copyprt & Transfer Performs the AS/400 command CPYSPLF,
translates the file for the micro, and displays a FROM3XB

prompt (see Figure 10-2) for the transfer of the translated

work file from the AS/400.

NOTE:    You must specify TRANSLATE (*NO) in the FROM3XB command. This is
because the PRTFROM3X command performs the translation.

NOTE:    If the OUTQ that you specify has a lot of files in it, the
command takes more time to process.

Library 

The name of the library containing the OUTQ. *LIBL is
valid.

TRANSFILE 

The qualified file name of the translation table file to be
used. The default is TRANSLATE.

Library 

The name of the library containing the TRANSFILE. *LIBL

is valid.

The TRANSFILE member name. The default name is ETOA1, an
EBCDIC-to-ASCII table supplied with ETU.